first view of the circus super-model so far!

Today (3rd March), Trust volunteer Shirley brought the circus super-model in to Roman Circus House to show to Trust director Philip for the first time. It was also the first time that she had seen it all laid out together. The seating-stand (cavea) of the super-model is being made in eleven sections and, at a scale of 1:100, it is 4.5 metres long. Shirley brought all eleven sections in and laid them out together on the huge wooden stand which has recently been made for the super-model. So far Shirley, assisted by her husband John, have completed the basic skeleton of the whole circus. However, there is still a lot to do. Shirley and John are making all the wooden parts of the super-model, and local designer Roger Massey-Ryan will be 3-d printing all the architectural details, such as the monumental arch, the starting-gates, the magistrate’s box, and the features which stood in the spina – the obelisk and lap-counters – as well as the spectators, and even the chariots, charioteers and horses… Shirley and John still have to complete all the entrances, steps, the internal and external supporting walls, and all the buttresses… Then Shirley will paint the whole super-model.

Philip says: ‘The model is looking great. Shirley and John have made great progress, and in a relatively short period of time. It is very impressive.’

Shirley says: ‘We are both enjoying making the super-model – we are both enjoying the challenge! I sit at home and do the cutting and glueing. We are both very pleased with the model so far.’

The super-model is being made of two kinds of wood, bass and balsa, and Shirley and John are working from the detailed measurements and plans which the Trust has produced based on the evidence from our investigations on the remains of the circus itself, and from the 3-d modelled circus which Roger produced from our evidence. Bass wood is harder than balsa and it is being used to make the structural elements of the circus, such as the supporting walls of the seating-stand. The balsa wood kept splitting as they tried to make the curved end of the circus, so John had to try a different strategy: he made a semi-circular template in seven different sizes and then glued balsa wood to each one before cutting out the curved end of the seating-stand. He then made stepped templates of seven and eight levels, depending on which part of the seating-stand it is, to produce the straight sections of the stand. John has also had to plane wood off some of the planks of balsa to achieve the correct thickness.

The model has already taken many hours to make, and will take many more. Shirley hopes to finish the wooden part of the super-model in a couple of months and, when the whole model is completed, it will form the centre-piece of the circus centre here at Roman Circus House.

Many thanks to Shirley and John.

The images show the super-model on its stand today; the super-model under discussion by Philip, Shirley and Roger; and Shirley holding a block of stairway steps (ready to be sliced into sections) with her earlier sample section of the model, including a stairway.

 

OLYMPUS DIGITAL CAMERA

 

OLYMPUS DIGITAL CAMERA

 

OLYMPUS DIGITAL CAMERA

 

.

Leave a Reply

×